Quick Enquire
 

Fire Alarm System

Gas Leakage Alarm Panel – 2/4/6/8 ZONE

Gas Leakage Alarm Panel – 2/4/6/8 ZONE

The ERTL standard served as the basis for the design of the PSS-GLAP series 2/4/6/8 Zone gas leakage alarm panel. It is also the main component of an alarm system for gas leaks, intended for use in situations when a manual call point, hooter, and gas leak detector are necessary. There is a button to disable each zone.

  • Maximum number of Gas Leak Detector Inputs: 2 detectors each zone
  • Available Options: 2-4 Zone, 6-8 Zone
  • Outputs for Alarm devices: Includes 2 bells/fire relay/ fault relay
  • Auxiliary resettable power output: 24VDC/ 100mA limiting protection
  • Automatic power switchover: mains power and secondary power (from batteries)
  • Independent functional buttons with indication: User friendly interface for easy operation and recognition
  • Access levels to enter the panel
  • Fault supervision and notification: inputs, outputs, system, power, earth, fuse
  • Disablement: zones disablement
  • Evacuation: Fire drills to simulate leak alarm condition on panel
  • Silence: sounders and buzzer silence
    • 1 AC INPUT 220VAC 50/60Hz (+ 10% - 15%)
    2 DC OUTPUT 24VDC typical (+10% - 15%)
    3 Voltage for MCU 5V for MCU
    4 Current at 24VDC from PSE 450mA standby current
    5 Maximum current from PSE 1A except batteries charge
    6 Batteries current 1.85A maximum, current limited
    7 Auxiliary output 24VDC +/- 10%, 100 mA max, current limited, monitored
    8 Batteries 2*12V/ 7Ah sealed lead acid gel, self-regulated *
    9 Battery low-voltage protection 21V
    10 Detectors connection allowed each zone 20 (except MCPs)
    11 Zone alarm current 6mA minimum/ 27mA maximum
    12 Sounder output 2*0.75A
    13 Fire Relay 1A/30VDC maximum
    14 Fault Relay 1A/30VDC maximum
    15 Communication protocol 2 wires RS485 bus system
    16 Fuse for AC Power 1 A/ 250V glass tube fuse 5 X 20mm
    17 Fuse on DC Power 1A/ 250V glass tube fuse 5 X 20mm
    18 Environmental Class A temperature range: -5 to 40°C (23~104°F) Humidity: 5 to 95% RH, non-condensing
    19 Terminal blocks rating All terminals rated for 12 to18 AWG (0.75 to 2.5 mm2)